Types of automation
- Single gates
- Bi-parting gates
Rated 4.8/5 on Google based on 130+ reviews
Door and Hardware Federation Assured
Planning an install
Planning your sliding gate automation
If you already have gates, you need to choose motors that work with your current specification. Below are a list of questions and options to consider before starting your install.
Materials
- What materials are your gates made of?
- Steel / Timber
- Vertical Bar Infill
- Close Boarded
- Palisade Fencing
- Mesh Infill
Environment
- Is the area often windy?
- Gates sliding behind a wall/fence?
- Domestic of commercial install?
- No. of times a day gate opens and closes?
- Is the ground level?
- Do you have sufficient run back space?
- How many users?
Gate Specifications
Weight and lengths?
You need the correct gate automation kit that's suitable for the length and weight of your gate.
How long is the gate?
Do you have enough run back space for the gate to slide fully open? If it is a cantilever gate system, have you allowed for the extra section needed to cover the spread of the carriage unit approx. 40% extra length?
How far does the gate open?
Do the gates open far enough to allow for vehicles to turn into the opening?
Safety First
The installation of powered gate automation is regulated by the Supply of Machinery (Safety) Regulations which recognises a powered gate as machinery. The law requires that the resulting machine complies with the Essential Health and Safety Requirements of the regulations. Guidance for the required level of safety can be found in EN 12453
If you are not fully aware of the requirements of the Supply of Machinery (Safety) Regulations, the implications of the Health and Safety at Work Act or the contents of EN 12453 you are advised to seek specialist training or the assistance of a properly qualified and equipped powered gate specialist before undertaking to proceed with the installation, repair or maintenance
Extras?
- Safety accessories
- Intercom/keypad
- Extra transmitters
- Exit buttons