IMPORTANT: DUE TO NEW INCREASED SECURITY SETTINGS, IF PAYING BY CREDIT CARD OR DEBIT CARD YOUR BILLING DETAILS MUST MATCH THE NAME ON YOUR CARD AND THE ADDRESS THE CARD IS REGISTERED TO EXACTLY, IF NOT, THE PAYMENT IS LIKELY TO BE DECLINED
<p><strong>Rated 4.7/5</strong> on Google based on 200+ reviews </p>

Rated 4.7/5 on Google based on 200+ reviews

<p>Door and Hardware Federation <strong>Assured</strong></p>

Door and Hardware Federation Assured

<p><strong>Trusted Trade Supplier</strong> for over 21 years</p>

Trusted Trade Supplier for over 21 years

  • Home
  • Rolling Center FL16/95 16mm O Groove Corner radius 950mm track for sliding gates
Compare selected products
FL16 B 1

Rolling Center FL16/95 16mm O Groove Corner radius 950mm track for sliding gates

Product Code: FL16/95

The corner sectional radius is the latest system for space saving; it enables sliding gates to be tracked 90° around corners where space is limited.

The FL16/50 is a 950mm diameter corner radius track. Bolt down with an O Groove 16mm diameter bar. Maximum weight capacity of 500kg.

View more
inc VAT

Related Products (1)

Rolling Center FL16/50 16mm O Groove Corner radius 500mm track for sliding gates

Rolling Center FL16/50 16mm O Groove Corner radius 500mm track for sliding gates

Product Code: FL16/50
inc VAT

ADDITIONAL INFORMATION

The FL16/95 track is ideal for sliding gate panels with a maximum size of 1300mm width.

To be used in conjunction with FLOORZ3/16 16mm O Groove bolt down track.

When used in conjunction with automation, the motor can be mounted at the front or side of the track. (Refer to below technical specification drawing.)

SPECIFICATION

Fl16 dimsMotor mounting

MANUALS

Sorry, there are no manuals available for this product.

This kit contains:

OPTIONAL ACCESSORIES

Floor Z3/16 16mm 0 groove galvanised bolt down track 3m
Floor Z3/16 16mm 0 groove galvanised bolt down track 3m
inc. VAT
47 1M Gear Rack 30mm x 12mm (Inc. 3 weld fixings)
47 1M Gear Rack 30mm x 12mm (Inc. 3 weld fixings)
inc. VAT
4 RM R Medium Adjustable Guide plate 4 rollers 0-90mm
4 RM R Medium Adjustable Guide plate 4 rollers 0-90mm
inc. VAT
50 RS Adjustable Top meeting point with removable rollers 80-150mm
50 RS Adjustable Top meeting point with removable rollers...
inc. VAT
F 40 SZ Bolt down travel stop
F 40 SZ Bolt down travel stop
inc. VAT
Rolling Center CRS1 Raised hinge for sliding sectional doors
Rolling Center CRS1 Raised hinge for sliding sectional doors
inc. VAT
Rolling Center 820G016 80mm Diameter swivel support wheel for 16mm O groove track
Rolling Center 820G016 80mm Diameter swivel support wheel for...
inc. VAT
Rolling Center 518GO16 50mm Diameter swivel support wheel for 16mm O groove track
Rolling Center 518GO16 50mm Diameter swivel support wheel for...
inc. VAT
Promo Link
Promo Link
About Us
About Us
DHF - Raising Standards Safety Assured
Information
Information
My Account
My Account
  • Rolling Center Ltd,
  • Unit 6,
  • Whitehall Cross,
  • Leeds,
  • LS12 5XE
  • © 2024 Rolling Center Ltd.
  • All Rights Reserved
Contacts
DHF - Raising Standards Safety Assured
Follow Us
Get free News & Tech advice straight to your inbox...
WARNING!

The installation of powered gate automation is regulated by the Supply of Machinery (Safety) Regulations which recognises a powered gate as machinery. The law requires that the resulting machine complies with the Essential Health and Safety Requirements of the regulations. Guidance for the required level of safety can be found in the EN 12453

If you are not fully aware of the requirements of the Supply of Machinery (Safety) Regulations, the implications of the Health and Safety at Work Act or the contents of EN 12453 you are advised to seek specialist training or the assistance of a properly qualified and equipped powered gate specialist before undertaking to proceed with the installation, repair or maintenance.

  • Rolling Center Ltd,
  • Unit 6,
  • Whitehall Cross,
  • Leeds,
  • LS12 5XE
  • © 2024 Rolling Center Ltd.
  • All Rights Reserved