Videx VR4KMI MiAccess proximity reader

ADDITIONAL INFORMATION

This reader is a modular component for the vandal resistant 4000 series range. It can be programmed and configured directly using the PROA-MS or PROH-MS PC management software (available to download for free from https://software.videxservices...) using the micro-USB connection on the back of the reader. MiAccess is a standalone offline proximity access system.

MiAccess fobs and cards are initally registered via the USB desktop reader (PROX-USB) connected to a laptop or PC and then the fob and card data along with reader configuration can be uploaded to the MiAccess reader.

Features:

• Mifare reader with sector read/write and support for Mifare classic, 1K & 4K card types
• Read range of up to 6cm with an operating frequency of 13.56MHz
• Programming and configuration using PC software
• Firmware upgrades supported via the micro-USB connection

SPECIFICATION

Technical Specifications:

• Operating Voltage: 12Vdc power input
• Current Consumption: 150mA (max.) during operation
• Data Connectivity: micro-USB port for connection to a PC
• Outputs: 1 x built-in relay (2A @ 24Vac/dc) programmable from 1-255 seconds or 0 seconds for ON/OFF toggle mode, 1 x RS485 bus connection for remote Ôtouch to exitÕ button and relay unit (RTTS surface or DINRTT flush)
• Inputs: push button
• Tamper Protection
• Status Indication: Tri-colour halo LED (amber, green and red) and buzzer
• Working Temperature (C): -20 to +50

Dimensions:

• 120 x 103 x 30 (hwd mm)