Nice Home RC200 receiver

ADDITIONAL INFORMATION

The NiceHome RC200 receiver allows you to control your automated gate and garage door systems, it also has the potential for lighting and sprinkler control. The RC200 radio receiver, used in combination with the ECCO5 transmitters, is suitable for the remote control of single-phase equipment powered by the mains voltage, with up to 500W power.

The possible commands are On/Off, “Man Present”, Timer 1 and Timer 2. The radio receiver operates at a frequency of 433.92 MHz and can memorise up to 30 ECCO5. The RC200 radio receiver does not require mounting, it can be positioned directly in the dedicated compartment.

Technical Specifications

• Type: radio receiver for control of general electrical equipment
• Technology: reception and decoding of the radio signals emitted by the transmitters activation of the output relays only in case of correspondence with a previously memorized code, correctly synchronized with the variability sequence
• Remote Controls: ECCO5 & STX100 transmitters
• Coding: 64 bit rolling code (18 billion billion combinations)
• Transmitter capacity: up to 30, if memorised in Mode 1
• Reception frequency: 433.92 MHz
• Receiver sensitivity: better than 0.6μV (with direct coupling)
• Transmitter range: estimated at 50-100m (this distance may vary in the presence of obstacles or electromagnetic disturbances)
• Power supply: 230Vac (+10-15%) 50Hz
• Maximum power output: 500W / 400VA
• Absorption when idle: < 0.7W (typical at 230 Vac)
• Activation time: approx. 300ms
• Deactivation time: approx. 300ms
• Timer resolution and precision: 1s/±2%
• Operating ambient temperature: -10°C … +55°C
• Protection class: IP55 (enclosure undamaged) with round cables having a diameter of 6.5 to 8.5 mm
• Dimensions / weight: 98 x 26 x 20mm / 45 g