Rated 4.7/5 on Google based on 200+ reviews
Door and Hardware Federation Assured
THIS KIT DOES NOT INCLUDE DRIVE RACK
This is an easy to install sliding gate kit which is suitable for gates up to 600kg in weight.
A quiet and reliable sliding gate kit that is easy to install
The Robus 600 with inductive limits is suitable for light residential gates.
It is adaptable to climatic conditions and has adjustable acceleration and deceleration at opening and closing.
View more
User-friendly: the Nice BlueBUS technology, enables to power and control a maximum of 7 pairs of photocells from the MoonBus series using two wires only.
Self closing: can be programmed to self close.
Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor.
Advanced: Robus 600 & 1000 are equipped with a temperature sensor which adapts the motor power to the climatic conditions and at the same time the thermal cut-out. A master/slave selection automatically synchronises 2 motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.
Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.
Sturdy: base and release in pressure die cast with easy to open handle.
Very quiet: gear motor on bearings.
24 vdc 600kg irreversible electro-mechanical motor with inductive limits and built in control panel
EMPB Photocells
Receiver
2 Channel Transmitters
