Omega sliding gate kit & Robus sliding automation gate kit bundle offer

ADDITIONAL INFORMATION

Omega concrete in kit includes:

• 2x 1227PSO 120mm dia 20mm o-groove wheels with 2 bearings and support
• 2x CN40 40mm dia nylon rollers
• 3x OmegaZ3new concrete in ground track with for 20mm wheels
• 2x 53NO joint pins for Omega tracks

Robuskit3 sliding gate automation kit includes:

• 1x RB1000 24v sliding gate motor for gates up to 1000kg
• 1x pair EPMB BlueBus safety photocells
• 2x ON2E 2 button rolling code transmitters
• 1x OXI 4 channel plug in rolling code receiver

SPECIFICATION

Robuskit3

This is an easy to install sliding gate kit which is suitable for gates up to 1000kg in weight.It is a quiet and very reliable sliding gate kit which can be fitted without professional assistance. The RobusKit 3 is suitable for light to medium residential gates. It is adaptable to climatic conditions and has adjustable acceleration and deceleration at opening and closing.

User-friendly: the Nice BlueBUS technology, enables to power and control a maximum of 7 couples of photocells from the MoonBus series using two wires only.

Self closing: can be programmed to self close.

Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor.

Advanced: Robuskit 1 & 3 are equipped with a temperature sensor which adapts the motor power to the climatic conditions and at the same time the thermal cut-out. A master/slave selection automatically synchronises 2 motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.

Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.

Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.

Sturdy: base and release in pressure die cast with easy to open handle.

Very quiet: gear motor on bearings.